80011ATS 3kW 11" Immersion Heater

Product Code: 80011ATS

Product Information

 

Key features

– For use in water, in domestic applications
– Single thermostat pocket

Technical data

– Material: Incoloy 800
– Loading: 3kW
– Element diameter: 8mm
– Head size (BSP): 2 ¼”
– Temperature range: Preset 60°C
– Voltage: 240V 1-Phase
– Supplied with thermostat

 

This is a 3kW, 11inch Incoloy Immersion Heater complete with operating rod thermostat (SS7) and separate safety manual reset cut-out. Installed products will carry the Shel-Nibe brand which is part of the Nibe group to which both Shel and Heatrod both belong. The 80011ATS can be used in all standard domestic water areas including normal use in hard water areas susceptible to limescale. If particularly aggressive water conditions are present or the duty/usage is higher than normal then we would recommend a titanium element version which can be priced and manufactured on request.

This immersion heater is most commonly fitted with Shel SS7 thermostat.
See our “Thermostats & Controls” section for more details and to purchase these products.

Installation Instructions for 80011ATS can be found here.

How to Measure the BSP Thread size of your Immersion Heater:

Once you have measured the thread, use the table below to select the correct BSP size:

£22.66 inc. VAT

Available on request

SKU: 80011ATS Category:

Additional information

Head Size (BSP)

Loading (kW)

Voltage (V)

Length (mm/Inch)

Element Diameter (mm)

Sheath Material

Secondary Protection

Stat Inches

Q: looking for 2 1/4 inch washer, a 11inch Immersion Heater and Backnut to fit the immersion to a steel tank
— Asked by lan salter on September 29, 2020
A: The part code for this immersion would be AESTB 327 or (SH311A-AA1CA1). Kind regards, Hayley
— http://Hayley%20Ashford

Have a Question? Submit it here!

*
*

*