Skip to product information
1 of 1

Heatrod Elements

14" 3kW 2 ¼ BSP Incoloy Immersion Heater SH314A-AA1BA1 AESTB 335 AESTB 340

14" 3kW 2 ¼ BSP Incoloy Immersion Heater SH314A-AA1BA1 AESTB 335 AESTB 340

SKU SH314A-AA1BA1
Regular price £38.98 GBP
Regular price Sale price £38.98 GBP
Sale Sold out
Shipping calculated at checkout.

Example of applications

Standard Domestic Water Areas

Benefits

Technical Spec

Number of Elements 1
Material Incoloy
Length (in) 14"
BSP 2 ¼
Voltage (V) 240
Phase Connection 1
Loading (kW) 3kW
View full details

Product Information

Key features

- For use in water, in domestic applications
- Single thermostat pocket
- Large range of thermostats available
- product approved by NEMKO – certificate available on request

Technical data

- Material: Incoloy 800
- Loading: 3kW
- Element diameter: 8mm
- Head size (BSP): 2 ¼"
- Temperature range: 70°C Max Op Trip, 80°C Safety (depends on fitted thermostat)
- Voltage: 240V 1-Phase
- Supplied with thermostat

This is a 3kw, 14inch immersed length AESTB335 Incoloy Immersion Heater complete with combined (operating & safety cut-out) plug-in thermostat and is typically used within standard unvented domestic water cylinders.. Installed products will often carry the ThermTec brand which is owned and manufactured exclusively by Heatrod Elements. The AESTB 335 can be used in all standard domestic water areas including normal use in hard water areas susceptible to limescale. If particularly aggressive water conditions are present or the duty/usage is higher than normal then we would recommend an equivalent product with titanium element which is the AESZB340.

This immersion heater is most commonly fitted with Cotherm TSE00187, Diamond-H WTS, TSR00014 and Thermowatt RTS-3 dual function thermostats
See our "Thermostats" section for more details and to purchase these products.

The AESTB-335 is designed to meet European Standards EN 60335-2-73:2003 +A1:06 + A2:09 used with EN 60335-1:2012 for the safety of electrical appliances that heat liquids for household and similar purposes. Testing has been carried out and the product approved by NEMKO - certificate available on request

 How to Measure the BSP Thread size of your Immersion Heater:

 

 

Once you have measured the thread, use the table below to select the correct BSP size: