Product Information
1.5kW 11", 14", 27" Low Power Immersion Heater
Key features
– For use in water, in domestic applications
– Single thermostat pocket
Technical data
– Material: Incoloy 800
– Loading: 1.5kW
– Element diameter: 8mm
– Temperature range: 70°C Max Op Trip, 80°C Safety
– Voltage: 240V 1-Phase
– Supplied with thermostat
This is a 1.5kW, 11″, 14″, 27″ immersed length Incoloy Immersion Heater complete with combined (operating & safety cut-out) plug-in thermostat and can be used within both vented and unvented hot water cylinders. This product is aimed at a low load applications where limited energy is available such as renewable applications in conjunction with Solar panels, Ground Source and Air Source heat pumping and in Marine applications such as such as Calorifiers. The eCOHeat can be used in all standard domestic water areas including normal use in hard water areas susceptible to limescale. If particularly aggressive water conditions are present or the duty/usage is higher than normal then we would recommend a low watts density or a titanium element version which can be priced and manufactured on request.
The Cotherm TSE00187 dual function thermostat is supplied with this immersion heater – see our “Thermostats” section for more details and to purchase these products as spares items.
Available Options:
|
Item Number |
Thread Size (BSP) |
Immersed Length (in) |
Immersed Length (mm) |
| HE1.511A | 2 ¼ | 11 | 280 |
| HE1.514A | 2 ¼ | 14 | 355 |
| HE1.527A | 2 ¼ | 27 |
685 |
How to Measure the BSP Thread size of your Immersion Heater:
Once you have measured the thread, use the table below to select the correct BSP size:
